How much does pest control cost in Australia?
Typical price ranges for general pest, termite, rodent, bed bug, and commercial treatments across Australia, plus what makes a quote go up or down.

The short answer
For most Australian homes, a one-off general pest treatment runs $180–$400. Termite inspections run $220–$500, and full termite treatments start at about $1,500 and climb fast from there. Below is a more detailed breakdown with the things that move a quote up or down.
Typical price ranges in 2026
These are mid-market AU prices for an operator with a licence and insurance. You can find cheaper (usually unlicensed, no warranty, or a single-product spray), and you can find pricier (premium products, larger properties, extensive infestations).
General pest treatment
Covers cockroaches, ants, spiders, silverfish, fleas. Internal + external spray, weep holes (the small gaps in brick walls that let moisture out), eaves, perimeter. Warranties are often 3 to 12 months.
- Apartment / unit (1–2 bed): $130–$250
- House (3 bed): $190–$350
- House (4+ bed): $280–$450
- Acreage / large block: from about $400, quoted on inspection
Termite inspection (to the Australian Standard)
- Standard home: $220–$500
- Acreage / multiple structures: from about $400
- Pre-purchase timber pest report on its own: $250–$450
- Combined building and pest inspection: $440–$715
This is just the inspection. Treatment is separate and only quoted if active termites or conducive conditions are found.
Active termite treatment
The single biggest line item in residential pest control. Two main approaches:
- Chemical soil treatment (perimeter barrier): $1,500–$5,000 depending on linear metres around the building and how much soil/concrete needs to be drilled or trenched.
- In-ground baiting systems: $2,000–$4,000+ to install, plus annual monitoring of around $300–$800. Lower disruption, slower kill, more ongoing relationship.
- Targeted nest treatment (where the nest can be located): $220–$900 if the colony is accessible. Usually combined with one of the above.
Rodent treatment
Bait stations + traps + entry-point identification. Usually a callout plus follow-up visit at 2–3 weeks.
- Initial visit + bait program: $160–$400
- Follow-up visits: often included
- Ongoing commercial program (monthly): Commercial work is quoted per site, by size and how often the pro visits.
Bed bugs
Quoted per room. Most jobs need a treatment and one or two follow-up visits. Heat treatment can sometimes be done in one.
- Single room: $200–$450
- Multi-room / whole apartment: $600–$2,500
- Heat treatment (premium): from about $1,500, and can cost more
Wasp + bee nest removal
- Single accessible wasp nest: $150–$300
- Difficult-access nest (high eaves, inside wall cavity): $300–$500
- Honey bee swarm relocation (by a beekeeper, not a pest controller): often free or low-cost, because a beekeeper wants the swarm for a new hive.
Commercial pest control
Commercial work is quoted per site, by size and how often the pro visits.
- Strata common areas: quoted per building
What makes a quote go up
Six factors do most of the work:
- Property size. More floor area + perimeter = more product + more time.
- Severity. Active infestation vs preventative treatment. Bed bug warranty work is the extreme: multiple visits baked in.
- Accessibility. Subfloors (the space under a raised floor), roof voids, high ceilings, attached outbuildings. Hard-to-reach areas add labour.
- Region. Capital cities tend to cost more than equivalent jobs in regional areas.
- Product choice. Eco-low-toxin treatments are often 10–20% more than standard synthetic pyrethroids. Worth it for sensitive households.
- Warranty length. 12-month warranties cost noticeably more than 6-month. The pro is pricing in the risk of a free re-treatment.
What makes a quote go down
- Bundling. Combining general pest + termite inspection at the same visit usually saves $20 to $110.
- Recurring contracts. With 6- or 12-month recurring service, ask about a discount on the standalone-visit rate.
- Off-peak booking. Spring (Sep–Nov) is the busiest season for general pest. Booking in winter is sometimes cheaper.
- Multiple properties. Strata + property managers booking 5+ properties at once usually negotiate a volume rate.
What to watch out for in a quote
A reasonable quote should list:
- Total inc-GST price (not just ex-GST)
- Areas treated (internal, external, eaves, weep holes, subfloor, roof void)
- Products used (specific name + active ingredient)
- Warranty length and what it covers
- Any chemical-handling instructions (kids, pets, washing surfaces)
If the quote is just “Pest control: $X” with no breakdown, ask for one. A professional pest controller is happy to detail the scope. Vagueness is usually a sign of either an unlicensed operator or a one-product spray-and-go.
Getting an accurate quote
For most jobs you can get a fixed-price quote without an in-person visit. Give the pro your address, number of bedrooms, and what you’re seeing. For termite work and anything commercial, expect them to want a site visit before committing to a price. Free pre-quote site visits are common. A fee of $50 to $120 is reasonable for distant or complex sites, and plenty of pros inspect for free.