Pre-purchase pest + termite inspections: what to know before you buy
Why a timber pest report (AS 4349.3) differs from a building inspection (AS 4349.1), what it covers, and how to handle active termites before settlement.

What it is
A pre-purchase timber pest inspection is a non-invasive inspection of a property you’re about to buy (the inspector looks, taps timber and checks moisture), done specifically to look for termites, wood borers, fungal decay, and conducive conditions (the things that cause termite attack: moisture, soil contact, gardens piled against the house). In Australia it’s done with reference to AS 4349.3, the standard for timber pest inspection of buildings.
It’s a different document from the AS 4349.1 building inspection, which checks structure, plumbing, electrical, and general defects. Most buyers book both at the same time from the same provider or two providers visiting together, and that’s usually billed as a “combined building + pest inspection.”
What it costs
- Pest inspection alone: $250–$450 for a standard suburban house. Larger homes, dual-occupancies, or rural properties trend higher.
- Building inspection alone: $330–$550, similar drivers.
- Combined building + pest: $440–$715, almost always cheaper than booking them separately because the inspector only travels once.
- Strata / unit inspection: $220–$350 (smaller scope, no subfloor (the space under a raised floor) or roof void of the whole building).
On a $1M+ purchase this is the cheapest insurance you’ll ever buy. A report that finds termite damage gives you grounds to renegotiate, or to walk away.
When to book it
It depends on your state and how you’re buying. In some states a contract can be made subject to a satisfactory inspection, which gives you a set number of days. Book it the day your offer is accepted so the report comes back inside that window. The inspector needs about 2–3 hours on site and 1–2 business days to write the report.
In NSW, most residential sales have a 5 business day cooling-off period after exchange, so get the inspection in fast, or before you exchange. At auction there is no cooling-off, so you have to book the inspection before bidding, which means paying for the inspection on a property you might not buy. Most serious buyers do this for any property they intend to actually bid on.
Who books it
The buyer, almost always. A vendor-supplied pest report (“the agent has one already”) is worth less because the inspector was instructed by and paid by the vendor. A report the vendor ordered may not protect you if it misses something. Pay for your own.
The ACT is the exception. There, ACT law has the seller give buyers a building and pest report before the sale, and a buyer can claim against whoever prepared it if it’s wrong. You can still book your own inspection if you want a second look.
Your conveyancer or solicitor can’t do this for you, but they’ll often recommend an inspector. You don’t have to use their recommendation. Choosing independently is fine and often cheaper.
What an AS 4349.3 inspection covers
The inspector checks:
- Inside the house: every accessible room. Skirting, architraves, door jambs, window reveals, walls and ceilings (looking for staining, cracking, sagging, hollow-sounding timber).
- Subfloor (if accessible): bearers, joists, stumps, ant caps, subfloor ventilation. Subfloor moisture is the #1 termite risk factor in older Australian homes.
- Roof void (if accessible): rafters, beams, ceiling joists, eaves linings. Termite mudding on roof timbers is common in single-storey homes.
- External walls: weep holes, cladding, eaves, fascia, architraves around windows, deck attachments.
- Outbuildings within 30 metres: sheds, garages, fences, retaining walls, decks. These often harbour the colony that will attack the main house next.
- Trees and stumps within 30 metres: a visual check. Old stumps near the house are a leading indicator.
- Garden conditions touching the house: soil banked against cladding, garden beds covering weep holes, mulch piled against walls, leaking taps, AC condensate dumping near footings.
What does NOT get inspected
An AS 4349.3 inspection is non-invasive. That means:
- No destructive testing. The inspector won’t cut into walls, lift carpet, or open up linings, even if they suspect something. They’ll note “recommend further investigation” instead.
- No furniture moves. If a wardrobe sits against an external wall, that wall isn’t fully accessible. Inspectors note “area not accessible” and that’s a real limitation of every report.
- No locked or sealed spaces. If the subfloor or roof void can’t be safely accessed (no manhole, no clearance), it’s noted as “inaccessible”, which is itself a finding worth treating as a yellow flag.
- No guarantee of a termite-free house. The report says “at the time of inspection, no evidence of timber pest activity was found in the accessible areas.” Termites in inaccessible areas can be missed by even an excellent inspection. This is normal and comes with a non-invasive inspection.
Tools the inspector uses
- Moisture meter: every inspector. Anomalies in wall moisture are the strongest early indicator.
- Thermal camera: most inspectors at this price point. Detects temperature anomalies from active termite galleries behind plaster.
- Termatrac / microwave radar: better inspectors. Detects movement inside walls without cutting in.
- Borescope: for cavity inspection through tiny drilled holes (usually only with vendor’s permission).
- Sounding (tap test): every inspector. Hollow timber sounds different.
When booking, ask “do you use thermal and Termatrac as part of the standard inspection?” If the answer is “only on request for extra,” pay the extra. It’s usually a modest charge and worth it.
The report
You’ll receive a written report (PDF) covering:
- Scope and limitations (what was and wasn’t accessible)
- Findings room-by-room with photos
- What was found, if anything, and where
- Past termite damage (treated or untreated)
- Other timber pests: borers, fungal decay
- Conducive conditions and recommendations to remove them
- Recommendations: e.g. install a termite management system, repair subfloor ventilation, remove soil contact
What to do if the report finds active termites
You have three normal options at this stage:
- Negotiate the price down by the cost of treatment + repair. A quote for treatment ($1,500–$5,000) plus damage repair (often thousands of dollars, depending on extent) can be deducted from your offer. Often the vendor accepts.
- Make treatment a condition of sale. Vendor treats at their cost before settlement, with a copy of the warranty transferred to you. Quick to negotiate, slow to execute (treatment and a follow-up check).
- Walk away. Always an option during the subject-to-inspection period. The lost inspection fee is the cost of avoiding a much larger problem.
Don’t panic-buy or panic-walk. Termite damage is fixable; the question is who pays. Take the report to your conveyancer and decide unemotionally.
What to do if the report finds past damage but no active termites
This is more common than active termites. Past damage means the colony was treated at some point (or died naturally). The questions to ask:
- Has the property been treated? When? By whom? Is there a warranty? Is it transferable?
- Is there an active termite management system (e.g. chemical perimeter, in-ground baiting)?
- Is the damage cosmetic, or has it affected structural members?
If the answer to all of these is “documented and reassuring,” past damage isn’t necessarily a deal-breaker. If the vendor can’t produce records, treat it as untreated.
How to choose an inspector
- Licensed pest manager in your state (NSW EPA, VIC Department of Health, etc.): check the licence number on the report against the state register.
- Professional indemnity insurance: ask whether they carry it. On Pestgrid, our checks cover a pro’s public liability insurance, not professional indemnity, so ask the pro about it.
- Recent reviews mentioning thoroughness, not just speed. A “quick turnaround” review is fine but doesn’t tell you whether they actually crawled the subfloor.
- Sample report on request. Quality varies wildly. A serious inspector will send you a (de-identified) sample so you can see what you’re paying for.
- Independent of agent/vendor. Don’t use the agent’s first recommendation without checking elsewhere.
Common buyer mistakes
- Skipping the inspection “because the house looks fine”: termite damage hides; that’s the entire point.
- Using the vendor’s inspector: paid by them, instructed by them.
- Reading only the summary page: the body has the nuance; read all of it.
- Not asking about access limitations: a report that couldn’t inspect the subfloor isn’t a full report.
- Treating “low risk” as “no risk”. Book a follow-up annual inspection after settlement.