AS 3660 explained: what the termite standard actually requires
Australia’s termite management standard in plain English: what AS 3660.1, .2 and .3 cover, how it differs from AS 4349.3, and the paperwork you should get.

You will often see “AS 3660” quoted on termite treatment proposals and warranties. This guide covers what each part requires, how it differs from the pre-purchase inspection standard people confuse it with, and the paperwork a good job should leave you holding.
What AS 3660 is
AS 3660 is the Australian Standard for termite management: the prevention and treatment of subterranean termites in and around buildings. It is what a licensed pro works to when they protect a new build or treat an existing home. It comes in three parts:
- AS 3660.1: new building work. Termite management installed during construction. Some parts go in before the slab. Others go on at or near completion: the perimeter treatment, and a reticulation system’s first charge once the slab has cured. A builder’s termite protection is installed with reference to this part.
- AS 3660.2: existing buildings. Termite management in and around a home that is already built. This is the part that applies when you have a house and need it treated or protected. It is the most relevant one for most homeowners.
- AS 3660.3: assessment criteria. The testing criteria a termite management system or product must meet to be used under .1 and .2. You will rarely deal with this one directly; it sits behind the products your pro chooses.
Which standard covers which inspection
This trips a lot of people up. For a home you own, AS 3660.2 sets its own inspection and inspection report, as well as the management (the treatment and barriers). The one inspection it leaves to AS 4349.3 (timber pest inspection of buildings) is the pre-purchase one, when you are buying a home.
So on a termite-only job for a home you own, the treatment proposal should name AS 3660.2, and the inspection report should name the standard it was done with reference to. A routine inspection that checks for every timber pest, not just termites, is covered by AS 4349.3, and so is a pre-purchase report. Any treatment should come with a written record of what was applied. If a system was installed (a chemical barrier, reticulation or a bait system), ask your pro what paperwork comes with it. If a quote doesn’t name a standard, ask which one the pro works to. (For the inspection side, see our termite inspection guide and the pre-purchase inspection guide, which covers AS 4349.3 in detail.)
What a good AS 3660.2 treatment includes
A good job is not just about spraying chemical. A good treatment of an existing building should give you:
- A management proposal: the recommended approach for your specific property (chemical soil barrier, baiting system, or reticulation), based on the inspection findings and the construction type.
- The treatment done properly:
- A continuous treated zone where that can be done, with any gaps or limits written down.
- Correct application rates.
- Products registered with the national pesticide regulator (APVMA), used as labelled.
- A certificate recording exactly what was done. If a system was installed, ask your pro what paperwork comes with it.
- A durable notice: a permanent label fixed in the building (commonly in the meter box, the kitchen sink cupboard, or the manhole) stating the treatment type, the product used, the date, and when the next inspection is due. The building code requires one for new building work, and AS 3660.2 expects one whenever a chemical system goes into an existing building. Ask your pro for one, and for written records of what was done.
- An inspection recommendation: at least annual re-inspection. Chemical and physical barriers reduce risk; they do not remove the need to keep checking.
The paperwork checklist
After a treatment, you should be able to put your hands on:
- The inspection report
- The termite management proposal
- The certificate for the work
- The durable notice fixed somewhere in the building
- The written warranty, with its term and conditions
Keep these. They matter when you sell the home, make a warranty claim, or hand over to the next pro for an annual inspection.
How to check your pro is working to the standard
- Ask which standard the treatment is designed to. The answer should be AS 3660.2 for an existing home.
- Ask to see the certificate and where the durable notice will be fixed.
- Confirm the products are registered with the APVMA and applied as labelled.
- Ask what the warranty needs you to do. Conditions vary, and bait systems need checking more often, at least every three months.
- Make sure they inspected first, rather than quoting a treatment blind.
Related
See the termite treatment options guide for how chemical, baiting, and reticulation systems compare, and termite treatment costs in Australia for current pricing.