How much does termite treatment cost in Australia? (2026)
What termite treatment actually costs in Australia in 2026: chemical barrier vs baiting, what moves the price, and how to avoid overpaying.

“Termite treatment” covers a few very different jobs, so a single number is misleading. For a typical Australian house in 2026, a full treatment costs $1,500–$5,000, and larger or harder-access properties can cost more. A one-off spot treatment of a small, contained area can be a few hundred dollars; a full perimeter system on a big double-brick home on a sloping block can cost more again. Below is what drives the figure, in plain terms.
Typical prices by treatment type (2026)
These are the on-the-ground ranges Australian pros quote. Each is the total you’d pay, including any GST, and assumes a licensed operator working to Australian Standard AS 3660.
- Chemical soil barrier (full treatment): $2,000–$5,000 for a standard 3–4 bedroom home. This is the most common treatment: trenching and treating the soil around the perimeter, plus drilling and injecting under paths, patios, and the slab edge.
- In-ground baiting system: $1,850–$4,000 to install, then $300–$800 a year for the monitoring that makes it work. Popular in the leafy, bushland-fringe suburbs where homeowners want lower chemical use.
- Reticulation (pipework) system: quoted on inspection, usually only cost-effective on a new build or major renovation when the pipes go in before paving.
- Localised / spot treatment: $220–$900 to treat a single active area (for example, one infested architrave or fence post). Only appropriate when an inspection confirms the activity is contained. It is not a substitute for a full treatment when the colony is established.
For the mechanics of each approach, see our termite treatment options guide.
What moves the price
- House size and perimeter: chemical treatment is priced largely by the linear metres of perimeter to trench and treat, so a bigger footprint costs more.
- Construction type: common brick-on-slab homes need drilling through concrete paths and slab edges, which adds labour.
- Paving and landscaping: extensive paths, driveways, and tiled patios mean more core-drilling and reinstatement, pushing the quote up.
- Extent of the infestation: an active, established colony with structural damage costs more to treat (and may need repairs quoted separately) than a preventive treatment with no current activity.
- Access and slope: tight side setbacks, steep blocks, and difficult-to-reach subfloors (the space under a raised floor) all add time.
- Chemical and warranty: premium non-repellent termiticides and longer written warranties cost more upfront but are usually worth it. Get the warranty term in writing.
Why location changes the price
Termite pressure varies a lot across Australia. South-East Queensland, the Sydney basin, and humid coastal regions sit at the higher-risk end, while cooler, drier inland areas see less activity. Bushland-fringe suburbs anywhere, where homes back onto trees and leaf litter, tend to be quoted with more thorough perimeter coverage, and annual re-inspections matter more in those spots. Labour rates also play a part: capital-city metro work usually sits at the higher end, so the same job often costs a little more in a major city than in a regional town.
How to avoid overpaying
- Get a proper inspection first. A treatment quote should follow a timber pest inspection, not precede it. See what an inspection covers in our termite inspection guide.
- Compare three quotes for the same scope. Make sure each pro is quoting the same treatment type. A cheap “chemical treatment” that skips drilling under the paths is not the same job as one that does it.
- Get the warranty in writing, including what it covers, for how long, and whether annual inspections are required to keep it valid.
- Be wary of a quote far below the others. In termite work, a lowball number often means a smaller scope, a cheaper chemical, or no warranty.
Related
Not sure you have termites yet? Read the signs of termites guide. For a national view of pricing across all pest types, see how much pest control costs in Australia.